Four Common Misunderstandings About Customized Jewelry Display Cabinets
Many customers do not know much about jewelry display cabinets. When customized jewelry display cabinets, most people come up with some craftsmanship and ideas for customizing jewelry display cabinets based on their own ideas, and this is often the most common misunderstanding. The following Shangyuan Display will list the 4 most common misunderstandings :
.jpg)
.jpg)
The thicker the glass, the better. The strength of glass is not determined by its thickness, but by whether it is tempered. After tempering, the strength of glass will increase by 3 to 5 times, and when broken, there are no large pieces of broken glass that are more likely to hurt people. For example, for jewelry showcase glass doors, you cannot choose very thick glass because if it is opened and closed frequently, the glass is too heavy and can easily cause the hardware fixing the glass to fall off and break, causing damage to the glass. Therefore, when customizing jewelry display cabinets, you can try to ask the display cabinet factory to temper the glass to ensure safe use.
.jpg)
Choose expensive or cheap lamps the same way. The choice of lamps directly affects the effect of product display and the service life of the showcase, and the color rendering index, heat dissipation, and light attenuation of different brands of lamps will be different. At this time, we must choose jewelry-specific lamps from well-known brands. . Brands such as imported Jingyuan chips, Osram chips, and domestic Feideli are all good choices. When choosing, they will recommend the corresponding lighting effects according to the display layout of your products to ensure the best effect of product display.
The thicker the plate of the jewelry display cabinet, the better. When jewelry display cabinet manufacturers make jewelry display cabinets, some parts such as countertops and door panels need to use 15 or 18 mm plates, and other parts of the basic plates are 9 to 12 mm. This is because the thicker the board, the heavier it is. Not only is it unsafe during installation and transportation, and the transportation cost is high, but also after installation, during long-term use, some parts, such as lintels, roofs, etc., are heavy due to their heavy weight. , easy to crack and fall.
The thicker the paint, the better. The paint production process is primer and topcoat. Before making the primer, you need to repair the nail holes. After repairing, smooth them with sandpaper. Then scrape a layer of pig blood ash on the surface of the cabinet. After drying, sand it evenly before proceeding. Primer coating. Apply the topcoat after the primer is dry. The paint effect is measured by paint brightness and surface smoothness, not paint thickness.
.jpg)
Shenzhen Shangyuan Decoration is a jewelry showcase manufacturer. It has been focusing on the custom jewelry display cabinet industry for 13 years. It has an area of 6,000 square meters and an excellent designer team. We have cooperated with customers all over the country, even the United States, Canada, Australia, Wenzhou Lai and other foreign regions have served well-known brands including Chow Tai Fook, Diamond Family, Diamond Bird, Kelan Diamond, Macau Shengfeng Jewelry, and Hong Kong Zhongyi Brand. Welcome customers who need customized jewelry display cabinets to come to consult and negotiate business!
If you want to know more about custom display case, please check on this.
If you want to know more about custom display case, please check on this.
Whatsapp: +86 153 3880 6346
Company official website:https://www.shangyuandisplay.com/
.jpg?imageView2/1/w/400/h/300)
